Hi

Some point i agree, but for this CAN-FAN you have a big sticker on the fan-packing "DO NOT USE WITH PHASE CONTROLLER"!!!!

This is a Fan problem and not a SGC problem. CAN-FAN have develop a special fan controller for this. https://canfilters.nl/en/controllers/satellite.

-Sensor are not precise.... I agree and we know the problem I have told until Summer we have new housing. (If you manage to remove the aluminum cover it will work much better) And we have made some offset calibration >Rooms > Sensors > List of sensors. Maybe this can help if you have a reference sensor.

CO2 can-only measure. Is not supported in 1.2.0 and the Beta version is for testing purpose. Also here we are working behind in this days.

I don't know Lumatek, today we have tested SANLight before we have tested dimmable ballast. The signal is 0-10V (make sure the jumper is set correctly) if the signal is 50% you should measure 5V on the terminal.... Do you have them? 100% you should have 10V (9.8V on our, can be improved)

Yep this WIFI to many users are struggling... and me to from time to time. Also here we are working on a totally new device. Currently we have a Raspberry-PI 3b and this connect within 10sec...

My SGC works with WIFI also the demo version from the website, I don't have this problems. The problem I see often is that the User need to be little bit more patience with this small computers. O.K I hope the new one will solve this issues it looks good for now what I have seen.

I apologize for all the inconveniences, our budget as man power is limited but the guys are doing them best to solve this issues.

Alain

Agee on every word, I am not alone - this is good. I think we are on same page Brother, could you hit me an email at goodini333@gmail.com(or @fckpl at telegram) - maybe you can help me to set up room using this SGC box without throwing it away?) I am same scale and same setup I guess.

Can-Fan - #1 fan manufacturer in USA, sure it is their motor problem - not really, I've been using step controllers previously, but for 315W fan it always was overheating and needed separate cooling fan, that is why I got SGC.

Maybe I haven't built a smart controller box Alain, but I've built 4 greenhouses in Jamaica for Canopy Growth and being a proud master grower, built dozen full scale 6-15 lights growrooms with full climate control(Ukrainian version of SGC but we were using assembler and basic hardware coding bypassing UI & OS like Arduino). And trust me, I've been calling Growtronix, Bluelab, Titan, you name them when I had issues with their equipment and all of those were resolved in timely manner, like pump calibration for nutes dozing and interfering RF signals etc.

I do not agree though about position of yours. All people are different. Unfortunately, without step transformer I am stuck and have to only monitor room with your equipment and regulate(control) it like I did before with DIY reliable devices. Sad, false advertising. I will check can-fan box for sticker "DO NOT USE WITH PHASE CONTROLLERS" and report, have it in basement.

I am using 1.2.1 BETA and there is CO2 control there - I can configure it but how do I disable one of the settings(there are a lot that I don't need since my room is sealed).

Hi Alain we grow we are not engineer or informatics... SGC come with 0 instruction only few videos on youtube is a unic machine and so need a Manual user otherwise how you can control with out text here on forum hundreds time? I have no time always to come here and ask ask .... maybe with Can fan was my fault .. but with blauberg not blauberg say 1-240v phase control.... anyway now I just scared and not use it...

I still not able to download 1.2.1 beta so am still at 1.2.0 and no co2 function...

is not about the light or the voltage is about a problem in the system...pleas try on you SGC :

light controller - on time 20 off time 9 with 1 hour sunrise and 1 hour sunset and you will see between sunrise and sunset controller is at 0 v so light off ..

people cannot wait for research ... you need to specify on your website SGC still in process to be as you advertise ...

Ok totally new device for sure is the solution... and all of us? who buy the actual version of SGC? we need to throw or what?

Hi Ivanovich yes we can meet online and do some tests!!! I text you!

CO2 function are available now and will be, but is not well tested. And for that we remove it from LTS version.

No not personally only in the laboratory. We can't do this here but I have some growers helping us.

1: Did you manage to install the current version 1.2.0.? According to us the sensor calibration is working. (I say it for the third time, don't border me again if you haven't made this! this is a direct answer in our mentality not rude.)

2: Agree... contact me directly by email to make an appointment. I don't want money,

3. make proper sine wave. This is not a Frequency controller this is a phase controller.

https://en.wikipedia.org/wiki/Voltage_controller#/media/File:Dimmer_60_volts.png

it cuts the sign wave 100x per second. The humming is depending on the fan. Almost all clime controller work with this technology which are sold in our marked (cheap ones). The solution would be EC fan or a frequency controller connected to a 0-10 output. Or a step transformer. But they are way more expensive....

4. Yes Evgeni has the most experience... he has one programmer learning. Until now, no master has fallen from the sky....

5. A question of man power and money. The tutorials may show an older version but they still up to date.

6. I have to defend our programmers, they doing them best but they aren't wizards. Evgeni is training a junior programmer and take care SGC 30h per week. we are slow o.k. lazy no.

You can meet me on following shows. canapamundi.com, cannatrade.ch on appointment, I have no booth.

Alain

what do you mean forget CO2 control function? I am running my rooms with CO2 - why have I bought GSC if it can't control CO2? Are you serious? You have CO2 tanks icons etc, and it claimed everywhere. Now what? I have to purchase separate CO2 controller with expensive CO2 sensor?

I have sent screen recordings to Evgeni, you can see that it doesn't connect at all, only when there is no password. Any other cases - no connection, static, dynamic, any one. If you want - I will give remote access to my computer and I can bet 100 USD you will fail as well.

about fans - well - that is dead end guys, you will get your motors burnt down very quickly if you don't compensate power drop, this is NOT how fan speed controller works for AC motors.

I guess you are partnering with ajustawing and not even interested in setting up SGC for general public.

I'd like to get a full refund if CO2 function was falsely claimed as advertised. I will not buy a separate 300 bucks CO2 controller since I already have SGC.